Carrier Access Network Device Axxius 800 Uživatelský manuál stáhnout pdf (Strana 232)

100

101

5-132 Axxius 800 - Release 2.2

CLI Commands

set

set (router) snmp

Use the set (router) snmp command to set the SNMP contact, location and name on the

specified Router card.

set (router) snmp contact

Use the set (router) snmp contact command to set the value of sysContact on the specified

Router card.

Syntax: set {rtr_card-addr} snmp contact

{"contact-name"}

Example: set 1 snmp contact "John Doe"

The example will set the value of sysContact on the Router card in slot 1 to "John

Doe".

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{"contact-name"}

The value of sysContact, with a maximum of 64 ASCII characters. Name must be enclosed

in quotes.

set (router) snmp location

Use the set (router) snmp location command to set the value of sysLocation on the

specified Router card.

Syntax: set {rtr_card-addr} snmp location

{"location-name"}

Example: set 1 snmp location "Newark"

The example will set the value of sysLocation on the Router card in slot 1 to

"Newark".

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{"location-name"}

The value of sysLocation, with a maximum of 64 ASCII characters. Name must be

enclosed in quotes.

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 567 568

Komentáře k této Příručce

Žádné komentáře

Carrier Access Network Device Axxius 800 Uživatelský manuál Strana 232

Komentáře k této Příručce

Související produkty a manuály pro Sítě Carrier Access Network Device Axxius 800