Carrier Access Network Device Axxius 800 Uživatelský manuál stáhnout pdf (Strana 217)

100

101

Axxius 800 - Release 2.2 5-117

CLI Commands

set

set (router) port flowcontrol

Use the set (router) port flowcontrol command to set the flow control on a TSR port. This

command controls the transfer of messages or characters between two points in a data

network to prevent congestion, or loss of data when the receiving device’s buffer begins to

reach its capacity.

Syntax: set {tsr_card-addr} port {port-number} flowcontrol

{none|rtscts|xonxoff}

Example: set 5 port 2 flowcontrol none

The example will set the flowcontrol to none on the second port on the TSR card

in slot 5.

{tsr_card-addr}

The slot number (1-8) that contains the TSR card.

{port-number}

The port number (1-4) of the TSR card.

{none|rtscts|xonxoff}

none Set flow control to none

rtscts Set flow control to hardware

xonxoff Set flow control to xonxoff

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 567 568

Komentáře k této Příručce

Žádné komentáře

Carrier Access Network Device Axxius 800 Uživatelský manuál Strana 217

Komentáře k této Příručce

Související produkty a manuály pro Sítě Carrier Access Network Device Axxius 800