Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Uživatelský manuál stáhnout pdf (Strana 61)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-3

Privileged Mode

configure terminal

Use the configure terminal command to enter the configuration mode.

Syntax: # configure terminal

Example: adit 3500# configure terminal

adit 3500 (config)#

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

copy

copy defaults

Use the copy defaults command to restore default setting.

Syntax: # copy defaults running-config

Example: adit 3500# copy defaults running-config

Going to reboot!

Restarting system.

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

copy path

Use the copy path command to load a configuration saved on your computer to the Adit system.

Note: A TFTP server must be running on your computer.

Syntax: # copy path {source-path} running-config

Example: adit 3500# copy path tftp://192.168.1.100/a3500_config running-

config

adit 3500#Configuration restore: Success

WARNING: A reload is needed for changes to take effect.

Field Definition

source-path Enter the source path, in the form tftp://address/filename

address - Enter IP address of the TFTP server.

filename - Enter the name of the configuration file to load onto the

system.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 495 496

Komentáře k této Příručce

Žádné komentáře

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Uživatelský manuál Strana 61

Komentáře k této Příručce

Související produkty a manuály pro Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca