Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Uživatelský manuál stáhnout pdf (Strana 190)

100

101

4-64 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Global Configuration Mode

Global Configuration Commands

vlan (vlan-id)

Use the vlan command to allow access to the VLAN port configuration commands. See Chapter 21,

Configuration - VLAN Port Mode for commands in this mode.

Syntax: (config)# vlan v-id

Example: (config)# vlan 100

(config-vlan-100)#

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

voice-codec

Use the voice-codec command to select which codecs are to be enabled and allows the user to set the

Packetization Time for that codec. To disable a codec, see no voice-codec command on page 4-52.

Syntax: (config)# voice-codec {g711alaw|g711ulaw|g729}

ptime {10|20|30|40|50|60|70|80}

Example: (config)# voice-codec g711alaw ptime 30

Supported Platforms:

Adit 3104, Adit 3500, MSR

Field Definition

v-id VLAN identifier. Range 2-4096.

Field Definition

g711alaw G.711, 64kbps, A-law

g711ulaw G.711, 64kbps, μ-law

g729 G.729, 8kbps

ptime Set the Packetization Time for the codec. Default for all is 20.

Packetization Time for each codec is as follows:

G.711A-Law = 10, 20, 30, 40, 50 or 60

G.711μ-Law = 10, 20, 30, 40, 50 or 60

G.729 = 10, 20, 30, 40, 50, 60, 70 or 80

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 495 496

Komentáře k této Příručce

Žádné komentáře

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Uživatelský manuál Strana 190

Komentáře k této Příručce

Související produkty a manuály pro Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca