Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Uživatelský manuál stáhnout pdf (Strana 454)

100

101

24-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - Voice Port Trunk Mode

no registration line

Use the Voice Port Trunk no registration line command remove a registration line. To add a

registration line, see registration line enable command on page 24-13.

Syntax: (config-vport-trk-{n})# no registration line number

Example: (config-vport-trk-1)# no registration line 1

Supported Platforms:

Adit 3500, MSR

no registration line enable

Use the Voice Port Trunk no registration line enable command to disable a registration line. To

enable line registration, see registration line enable command on page 24-13.

Syntax: (config-vport-trk-{n})# no registration line number enable

Example: (config-vport-trk-1)# no registration line 1 enable

Supported Platforms:

Adit 3500, MSR

no registration line logging

Use the Voice Port Trunk no registration line logging command disable line logging on a PBX

line. To enable logging, see registration line logging command on page 24-14.

Syntax: (config-vport-trk-{n})# no registration line number logging

Example: (config-vport-trk-1)# no registration line 1 logging

Supported Platforms:

Adit 3500, MSR

Field Definition

number Enter line number to Remove. Range 1 -300. Note: This line must be

enabled for this command to be accepted.

Field Definition

number Enter line number to disable. Range 1 -300. Note: This line must be

enabled for this command to be accepted.

Field Definition

number Enter line number to disable. Range 1 -300.

1 2 ... 449 450 451 452 453 454 455 456 457 458 459 ... 495 496

Komentáře k této Příručce

Žádné komentáře

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Uživatelský manuál Strana 454

Komentáře k této Příručce

Související produkty a manuály pro Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca