Carrier Access Network Device Axxius 800 Uživatelský manuál stáhnout pdf (Strana 49)

Axxius 800 - Release 2.2 51

Quick Start

Provision a Unit

Establish a Static Channel Connection

Use the following commands to establish a static channel connection.

Set Up a V.35 Port

Use the following commands to set up a V.35 port.

Command Description

set {ds0-addr} type

{voice|data}

Set the channel type for the channel you

want to map. See set (ds0) command for

details.

set {ds0-addr} signal {emdw|

emi|emicpd|emw|gs|ls}

Set the signaling option for the channel you

want to map. See set (ds0) command for

details.

connect {slot:port}

{slot:port}

Connect the channels. See the show connect

command for details.

Command Description

set {v35-addr} cts

{cd|high|low|rts}

Set the Clear to Send operation mode. See

set (v35) command for details.

set {v35-addr} data

{invert|normal}

Set the data mode. See set (v35) command

for details.

set {v35-addr} clock

{source|external}

Set the clock mode. See set (v35) command

for details.

set {v35-addr} speed

{56K|64K}

Set the speed. See set (v35) command for

details.

set {v35-addr} txclkinv

{invert|normal}

Set the transmit clock inversion mode. See

set (v35) command for details.

set {v35-addr} rxclkinv

{invert|normal}

Set the receive clock inversion mode. See

set (v35) command for details.

1 2 ... 44 45 46 47 48 49 50 51 52

Komentáře k této Příručce

Žádné komentáře

Carrier Access Network Device Axxius 800 Uživatelský manuál Strana 49

Komentáře k této Příručce

Související produkty a manuály pro Sítě Carrier Access Network Device Axxius 800